Setting up
Place portable InfoLoop
™ Unit on the
desk or counter top between the
hearing aid wearer and the member
of staff so that:
Rear of unit, with in-built microphone,
Faces staff
Front of unit, with ‘T’ position label,
Faces hearing aid wearer
To Charge
Plug in power supply unit
Connect flexible lead socket marked ‘PWR’ on the rear of
the portable InfoLoop™ Unit
Unit may be charged while the system is in operation
When charging, the LED will illuminate constant red
Note:
The unit will operate approximately 8 hours on fully charged batteries
Switching ‘ON’
Slide the switch on the left hand side of
the rear of the Portable InfoLoop
™ Unit
to the ‘ON’ position. See below:
If LED flashes red:
Battery is low and requires charging
Portable InfoLoop
™
