OTC AirEZY2405-SWG, User Manual, Page: 9 / 14

Diagram 3 Using AirEZY2405-SWG-SWG in conjunction with AirEZY2405-SWG-AP
(Access Point) in Client/Server Configuration in a stand-alone network
Server
AirEZY2460AP
Access Point
AirEZY2460-SWG
AirEZY2460-SWG
CASE 3: Peer to Peer Installation
If you are planning to set up a peer to peer work group, instead of placing one AirEZY2405-SWG unit
at the file server, you will need to set it up at your lap top / note book PC, workstation or desktop PC.
For peer to peer application, place one AirEZY2405-SWG unit at your peer desktop or peer laptop PC,
place other AirEZY units at the other designated peer stations. In addition, peer to peer wireless LAN
applications requires Windows 95, Windows NT, Novell Personal NetWare, AppleTalk, or any network
operating system that supports peer to peer connectivity to be properly installed on your system in
advance.
Diagram 4 Using AirEZY2405-SWG-SWG in a Peer to Peer Configuration
AirEZY2460
-SWG
AirEZY2460
-SWG
AirEZY2460
-SWG
4.1.1 AirEZY2405-SWG: RJ-45 / 10Base T Installation instructions at your file server:
1) Attach the provided gray RJ-45 / 10 base T cable to the AirEZY2405-SWG unit. NOTE: This
connection port is similar to a standard telephone jack connection. (Perform this procedure when
installing on the file server.)
2) Attach the other end of the gray cable to the server. This will connect the AirEZY2405-SWG to the
Network Interface Card (NIC) in your server.
(Perform this procedure when installing on the file
server.)
3) Another option available is to connect the AirEZY2405-SWG to an open or free port on your
10Base T hub, router, or switch with the RED cross over twisted pair cable.
4) At this stage of the installation process, check that the AirEZY2405-SWG unit is properly
orientated , be sure that the unit’s antenna extends beyond the chassis of the file server or hub. Also,
ensure that all RJ-45 / 10Base T connections are in place on the network and on your AirEZY2405-
SWG unit.