OTC AirEZY2405-SWG, User Manual, Page: 11 / 14

4.1.2 AirEZY2405-SWG: RJ-45 / 10Base T Installation instructions for your client sites:
This section of the manual will provide you with the instructions for installing the AirEZY2405-SWG
client portion of your wireless LAN.
1) Attach the AirEZY2405-SWG to one RJ-45 cable just as you would install a standard Ethernet
station node when using a standard twisted pair cable. NOTE: This connection port is similar to a
standard telephone jack connection.
2) Attach one end of the cable to your desktop or portable computer and the other end of the cable to
the AirEZY2405-SWG.
NOTE: Be sure to have a Ethernet network card or PC card(PCMCIA Ethernet card) installed on your
desktop PC or portable PC.
3) At this stage of the installation process, check the orientation of AirEZY2405-SWG unit * .
Ensure that all RJ-45 10 Base T connections are in place on the network and on your AirEZY2405-
SWG unit.
4) Before plugging in the first AirEZY2405-SWG client unit at your desktop PC or workstation, be sure
that your AirEZY2405-SWG unit at your file server is ready to be linked. (Refer to the table in either
Section 4.1.1 for standard AirEZY2405-SWG operating conditions at the file server). At this point,
insert the power adapter plug into the AirEZY2405-SWG unit. Find a convenient plug location
adjacent to your desktop PC or portable PC.
••••
See Appendix A
5) After being plugged in, the AirEZY2405-SWG unit will begin a series of self diagnostic tests. This
series of tests will last for a few brief seconds as it begins the auto detection mode.
6) Once the power is on, the LEDs on the front panel will flash in the following pattern:
LED color Pattern Duration Indication
yellow long flash 2 secs. Power on diagnostic
and auto-detection
yellow series of 1 long continuous
Poor UTP cable connection
and 1 short flash
-or-No UTP cable detected
constant rapid continuous Normal client/peer
flash activity
yellow series of 1 long continuous
Security check denied by
and 2 short flashes
server
green constant on continuous Receive/RX
red variable variable Transmit/TX
red constant on continuous Power Indicator
6) Once the power is on, the LEDs on the front panel will flash in the following pattern:
LED color Pattern Duration Indication