FTD100-XXR3 Series Installation & Operation Manual
www.ot-systems.com
4
(2) Product Overview
2.1 Introduction
The FTD100-XXR3 Series products comprise of either single-mode or multi-mode fiber optic
transmitters and receivers for the optical transmission of
ONE forward (Tx → Rx) video in THREE
individual fiber links. The products work at wavelengths of 1310nm or 1550nm with either a
9/125um or 62.5/125um fiber for single-mode or multi-mode transmission respectively.
The FTD100-XXR3 Series products are
compatible with
the transmitters of the
FTD100Micro Series
,
FTD100M Series
and
FTD100 Series
.
A non-compressed 8-bit digital video transmission scheme is implemented which supports
video in NTSC, PAL and SECAM formats.
For single-mode transmission, we also offer specifically designed products for long-haul
transmissions up to 60km. These models include the
letter “L” in the suffix, e.g. FTD100-SSR3
L
,
etc.
The FTD100-XXR3 Series units are available as standalone units, which can be mounted
horizontally or vertically wall-mounted on any fixture. The standalone unit comes with an external
power supply FT-PA/12V, which can be powered by local 110/220V power.
The FTD100-XXR3 Series are also available as plug-in
card modules installed in a 19”
rack-mount chassis. Each plug-in card occupies one slot in the rack-mount chassis. The rack
mount chassis has to be ordered separately, and comes with its own power supply for powering
the installed card modules.
