3.2 Instructions for Electrode Pads
1. Only use the electrode pads supplied by the manufacturer; other electrode pads may
have
a risk of unsuitable electrical characteristics with your stimulator.
2. The side of electrode pad is 88mm × 58mm × 3.2mm, 50.04 cm
2
.
3. Do not use the electrode pads on different people. Otherwise, skin reaction or cross
contamination may occur.
4. Please always turn power off before removing or repositioning the electrodes.
5. Please wash skin thoroughly, and then dry it before applying the electrodes.
6. Please apply the whole surface of the electrode pads firmly to the skin. Do not use electrode
pads that do not stick properly to the skin or only partially stick to the skin.
7. In case of skin redness under the electrode pads after stimulation, do not stimulate in the
same place if skin redness is still evident.
3.3 Mode Selection
Press the MODE
▲
or MODE
▼
button to select MODE. After selecting the mode, the default
intensity is set to ‘0’. Please press FOOT
▲
, BODY
▲
and FOOT
▼
, BODY
▼
button to
increase/decrease the intensity of body or foot.
The charts below are merely a suggestion for where to place the electrodes, what mode to
choose and how long to stimulate, but only after the user has gone through the starting
procedure (above) and is familiar with the device.
Usage Figure
Note
Muscle Stimulation (Mode 1-8)
Stimulate Muscle at Shoulder
Apply the electrode pads on shoulder.
It is intended to stimulate healthy muscles in order to
improve and facilitate muscle performance of the shoulder.
For 25 minutes; twice or 3 times a day.
Stimulate Muscle at Back
Apply the electrode pads on back.
It is intended to stimulate healthy muscles in order to
improve and facilitate muscle performance of the back.
For 25 minutes; twice or 3 times a day.
Stimulate Muscle at Waist
Apply the electrode pads on waist.
It is intended to stimulate healthy muscles in order to
improve and facilitate muscle performance of the waist.
For 25 minutes; twice or 3 times a day.
Page 20 of 37
