6
Using Your Product Control Panel
A. Speed Dial – Turn dial clockwise to choose from manual speed
settings from “Low” to “High”. Once you select a speed, the blender
will run until you turn it back to “Off.”
B. Programmed Settings – In order to activate the programmed buttons,
first turn the speed dial counter-clockwise to the Programmed/Pulse
Setting. Then select the programmed button you would like to use.
They have been developed for optimal use when blending those types
of foods.
Soup: 20 second ramp up to “Medium”, 5 minutes on “High”.
Dips/Spreads: 2 (10-second) pulses at “Medium-low”, 30 seconds on “High”.
Smoothie: 10 seconds to ramp up to “Medium”, 20 seconds on “High”.
NOTES:
1. If you would like to stop the blender in the middle of a programmed
cycle, simply press any button.
2. For some blending tasks, it may be necessary to supplement the
programmed setting with additional blending time.
C. Pulse – Turn the speed dial counter-clockwise to the Programmed/
Pulse Setting. Then press the “Pulse” button for the desired time.
D. LED Lights – The lights around the selected programmed buttons will
pulse when the unit is operating in that mode.
E. Flashing Light – When speed dial is turned to the Programmed/Pulse
setting, the Pulse button light will flash red to indicate the unit is
ready to operate. Warning: Flashing light indicates ready to operate.
Do not touch the blade.
B
A
D
C
E
BLSTVB-000-033_13EFM1.indd 6
10/8/13 11:05 AM
