English-18
Step 4. To Start:
Press the Start/Cancel Button to start the
defrosting process. The red Start/Cancel
Button light will illuminate. The LCD
Display will show the Defrosting function,
the countdown time and the selected
temperature. The unit will begin to work
and the timer will start counting down.
When the Defrosting cycle is complete, the
unit will emit 3 beeps. The LCD and the
Start/Cancel Button Light will turn off after
30 seconds.
NOTE:
You can cancel the defrosting cycle at any
time by pressing the Start/Cancel Button
once.
U
SING
THE
R
EHEAT
F
UNCTION
(S
EE
F
IG
. 11)
Step 1.
Turn the Function Knob to the Reheat (
)
function.
Default Temperature:
165ºC.
Default Time:
15 minutes.
You may manually activate the Turbo
Convection Heat by pressing the Turbo
button once to turn it on. The blue light of
the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature/Time Knob if
you wish to increase or decrease the
temperature setting. The frame around the
temperature setting on the LCD display will
be blinking. For the Reheat function, the
temperature can be set from 65 to 230ºC
in 1-degree increments. Once you have
selected the desired temperature, press the
knob once to set that selection. The frame
of the temperature will disappear and the
frame of the time setting will start blinking.
Figure 11
