Press the off “O” button on the speed selector and unplug the unit from the electrical outlet.
Clean the fan base with a sponge or soft cloth damp with warm water neutral soap or detergent.
Dry it with a clean, dry cloth.
Remove the front grill by unlatching it from the safety latches.
Clean the fan blade, front grill and rear grill with a sponge or soft cloth damp with warm water with
neutral soap or detergent. Dry it with a clean, dry cloth.
Place the front grill back by attaching it to the rear grill using the safety latches.
Never immerse the product, the base, the plug or the electrical cord in the water, as this may
damage the appliance or cause the risk of electric shock.
Maintenance
Keep your product in good working condition. When not in use, turn it off, unplug it from the
electrical outlet and keep it in a dry, safe place and away from children and pets. Preferably in its
original packaging. The power cord must not be twisted, pulled, or rolled around the unit to avoid
ruptures of the internal wires.
If the power cord is twisted, untwist it before using or storing the product.
NOTE: The updating of parts and hardware components is done continuously. Therefore,
some of the specific instructions and images of this manual might differ slightly from
your unit.
Correct disposal of materials
This symbol indicates that the product should not be eliminated with other domestic
waste. The is important in order to avoid possible damage to the environment or
cause issues related to damaging human health as a result of disposing it with
regular garbage. It is important to responsively recycle to promote sustainability
and the reutilization of resources and materials. To recycle it, contact the waste
department of your city. Electrical and electronic products contain harmful
substances and should be properly recycled.
Attention! Read all instructions in this manual before using the product, always observing
the safety instructions and following the instructions to prevent accidents and/or injuries.
Attention! Never use solvents or abrasive materials (soap, steel or brushes) when cleaning
the product. These materials can damage your product.
5 - CLEANING AND MAINTENANCE
ENGLISH-6
Ensure that the fan is mounted and placed on a flat, sturdy and dry surface. Turn the on/off dial to
the preferred speed and then plug into the electrical outlet.
Switch unit on by pressing the desired
speed button.
0
0
MAX
ECO
MAX
ECO
[Figure 7]
1 - OFF Setting 2 - Eco Mode
3 - Night Mode 4 - Maximum Speed
5 - Maximum Speed 6 - Eco Mode
Your fan can operate fixed in one position or oscillate, distributing
the air through the environment. To turn on and off the oscillation,
simply tighten/pull the oscillation pin.
[07] Attach the fan body, using the fixing screw, to the adjustable column already mounted on the base.
[Figure 5]
[Figure 6]
[Figure 8]
Attention! Plug unit to a wall electric outlet with the same voltage of the one from your unit.
4 - OPERATING INSTRUCTIONS
ENGLISH-5
5
3
4
2
1
6
