b.
According to the diagram, the water inlet is aligned with the tap and the nut
on the water inlet is tightened.
2)
Connection between water inlet and Washing machine
a. Before connecting, please check whether the
sealing gasket in the water inlet nut has fallen
off or not.
b. Put water inlet nut on inlet valve joint.
c. Tighten the water inlet nut.
4 Connection of the drain hose (some modes have been connected)
5 To change the side of drain hole on body
sealing gasket
sealing gasket
inlet valve joint
inlet valve nut
a. Remove the
cover from
left side.
b. Remove the two
pieces of screw
of right side hole.
c. Loosen the fixing ring on pipe,
turn the drain hose to left side
hole of body,then reinstall the fixing ring.
Pls note to put the sealing ring back, in
case leaking water issue.
d.Move the connection
part of drain hose to
left side and fix it,
using the two pieces
screw.
e.Use the cover to
seal the hole of
left side.
Left side view
right side view
Left side view
fixing ring
Sealing ring
conncetion pipe of drainage
drain connection part
right side view
a. P
c.Put the hose to drain hole, the hole
must be no higher than 90cm(A) from
bottom of machine.
ress down the fix ring,
and hitch it over the drain hose.
b. Press down the fix ring, and
then connect the drain hose with
the connection pipe.
7
Summary of Contents for OS-WSMD18S
Page 1: ...MODELO MODEL OS WSMD18S ...
Page 35: ......
