Oster OS-SAWMCB11W, Instruction Manual

Page: 16 / 24

The use of drain hose
The ex factory installation position of the
drain hose is shown in Figure 1.
The hose protrudes out from washing
side.
Lay down the machine on the soft object
with its face towards the ground. Take the
hose out from the fixing groove. (Figure 2)
Along with the groove of the washing tub
side, insert the hose with the step 1 to 3
and spread it to the washing side. (Figure
3)
Insert the hose in the groove by hand, do
not destroy the hose.
Change the direction of the drain hose
Figure 1
Figure 2
Figure 3
Soft object
Back
Front
Soft object
Drain
10cm
The hose should drain smoothly
1. The height of the hose should be less than
10cm, or it can not drain completely(down drain).
2. Maximum fixation height for hanging the
hose(with a hook)over a drain outlet(eg.drain
pipe,bath or sink)should not be higher than
1.2metres above the floor.(This is for pump drain
model only)
3. Do not trample or press the hose.
INSTALLATION AND ADJUSTMENT
English-3