English-9
DAILY USE
First use
Cleaning the interior
Before using the device for the first time, wash the interior and all internal accessories with
warm water and neutral soap to remove the typical new smell of the product, then dry
completely.
¡Important!
Do not use abrasive detergents or powders for cleaning, as they will damage
the finish of the oven.
Temperature setting
1.0 Electrical connection
When the appliance is plugged in, all LED indicator lights will flash once. Then the appliance
will resume the mode previously set before the electrical outage.
2.0 Temperature Setting
► Setting: Press “TEMP” button, enter the temperature setting mode. The temperature
indicator bar of temperature goes up a scale by each press. This setting runs in cycles.
Temperature can run from Scale MIN to Scale MAX. Scale MAX is the coldest. The
temperature is automatically set in 5 seconds after last press.
► Super Freezing
• Press “TEMP” button consecutively to enter “SUPER” freezing mode from Scale MAX, the
indicator bar on the left hereby will turn dark whereas the indicator light of "SUPER" turns
on. This mode is automatically set in 5 seconds ater last press.
• The compressor keeps working in “SUPER” freezing mode.
• If the “SUPER” mode keeps running for 52 hours and not stopped manually, the system
will automatically cut out this mode, with the temperature back at Scale 5.
2.1 Power On & Power Off
• If the appliance is working, press “ON/OFF” for 3 seconds to turn off.
• If the appliance is off, press “ON/OFF” for 3 seconds to turn on.
Luz de indicación de rango de temperatura
Luz de indicación de
funcionamiento
Luz de indicación de rápido congelamiento
Tecla de programación
Tecla de Apagado
MANTIENE
FUNCIONAMIENTO
CONGELA
CONGELADO
RÁPIDO
ENCENDIDO
APAGADO
TEMP