www.oster.com
www.oster.com
4
5
LEARNING ABOUT YOUR OSTER®
CAN OPENER
a
d
b
c
Magnetic Lid Lifter
Can Opener Lever
Drive Wheel
Cutting Blade
e
f
g
Knife Sharpening Slot
Bottle Opener
Retractable Cord Storage
HOW TO:
Opening cans
1 Plug electrical cord into 120 volt,
60 Hz AC outlet.
2 Pull up on the magnetic lid lifter until
it locks in the up position, then gently
lift the can opener lever to the upright
position as shown in Figure 1.
3 Place the can so that the lower edge
of the can lip rests on top of the drive
wheel. Be certain that the cutting blade
is on the inside of the can lip as shown
in Figure 2.
4 Push can opener lever down firmly and
hold until the can lid is automatically
pierced and the cutting action begins
as shown in Figure 3. NOTE: It is not
necessary to hold the can opener lever
down during the cutting cycle.
5 When the can is fully open, the
cutting action will automatically stop.
The can will remain in position until the
lever is raised.
6 To release, grasp the can firmly in one
hand and raise the lever using the
other hand. The magnetic lid lifter will
retain the lid as shown in Figure 4.
Figure 1
Figure 2
Figure 3
Figure 4
b
c
a
d
e
f
g
FPSTCN2000_20EM1.indd 4-5
FPSTCN2000_20EM1.indd 4-5
12/4/20 10:19
12/4/20 10:19
