English-6
WHITE RICE AND BROWN RICE FUNCTIONS
If you would like to sauté prior to cooking white rice or brown rice, please refer
to Sauté Function section. Once you are done sautéing your ingredients, follow
instructions below.
Your 10-in-1 Multifunction Rice Cooker allows you to choose whether or not you
would like a crust on the bottom.
IF YOU WISH TO HAVE A CRUST ON THE BOTTOM, PRESS THE CRUST
BUTTON BEFORE PRESSING THE WHITE RICE OR BROWN RICE BUTTON.
THE CRUST LIGHT WILL BLINK UNTIL THE PRE-SELECTED CRUST STAGE
STARTS.
IF YOU DO NOT WISH TO HAVE A CRUST ON THE BOTTOM, YOU WILL
NOT HAVE TO PRESS ANY BUTTON. THE KEEP WARM FUNCTION IS THE
DEFAULT.
You may also use the white rice or brown rice functions without sautéing any
ingredients by simply following these instructions:
1. Place rice and water inside inner pot.
2. Measure raw rice for desired amount with measuring cup (180 ml) provided.
One cup of uncooked rice will make about two cups of cooked rice. Add rice
to inner pot. NOTE: Wash rice in a separate bowl, prior to cooking, if desired.
For softer rice, we suggest preparing rice and water in the inner pot and letting
soak for 10 – 20 minutes before cooking.
3. Using measuring cup, add proper amount of water to rice inside inner pot.
For Every Cup*
Type
Water Quantity
180 ml
Raw White Rice
1-1/2 Cups of Water
180 ml
Raw Brown Rice
2 Cups of Water
* The cup provided with the unit.
NOTE: You may need to adjust quantity of water depending on kind of rice
you are cooking and how moist you prefer it. For sticky rice, add slightly more
water. For fluffy rice, use slightly less water. If you are cooking brown rice, add
more water. You may also need to adjust water quantity by adding more water
if you are using rice cooker at a high altitude.
4. Set inner pot into rice cooker. Make sure inner pot sits directly in contact with
heating plate by turning it slightly from right to left until seated properly. Cover
with lid. WHEN USING WHITE RICE AND BROWN RICE MODES, DO NOT
OPERATE UNIT UNCOVERED. STEAM IS GENERATED DURING USE.
5. Plug unit into appropriate electrical outlet.
6. Start/Stop Button Light will start blinking.
7. Press White Rice Button “Arroz Blanco” or Brown Rice Button “Arroz Integral”
and then press Start/Stop Button to start automatic cooking process. The
lights for selected function button and Start/Stop button will be solid, indicating
selected function has started. IMPORTANT: Lift and remove lid carefully to
avoid scalding and allow water to drip into inner pot. Use paddle or another
long handheld utensil to scoop and mix rice. After mixing, cover inner pot with
lid.
