English 4
BEFORE USING YOUR OSTER
®
MULTI-USE
ELECTRIC GRILL WITH REMOVABLE PLATES
Before using your Oster
®
Multi-Use Electric Grill for the first time, please follow the
instructions below:
1. Remove any stickers from the product.
2. Clean and condition the non-stick surfaces:
• Remove the two cooking plates by pushing the respective release buttons and wash
them thoroughly with hot, soapy water. Rinse and dry them well and then place them
back on the unit ensuring they lock into place (see Figure 1).
•
DO NOT IMMERSE UNIT IN WATER.
• To condition the cooking surfaces, plug the appliance into the appropriate electrical
outlet. The red power on indicator light will illuminate. Allow the unit to pre-heat until the
green ready to cook indicator light is lit up.
• Wipe a small amount of butter or margarine onto the cooking surfaces, spread slightly
and wipe away any excess.
NOTE:
When using the unit for the first time, you may notice a fine smoke haze coming
out from the unit. This is normal. It is due to the initial heating of internal components.
Your Oster
®
Multi-Use Electric Grill With Removable Plates is now ready to use and it will
not be necessary to condition it again.
USING YOUR OSTER
®
MULTI-USE ELECTRIC
GRILL WITH REMOVABLE PLATES
1. Plug the power cord into the appropriate electrical outlet. The power on indicator light
will illuminate and remain lit for as long the appliance is plugged in.
2. Pre-heat the unit until the green ready to cook indicator light is lit.
3. Place the foods to be prepared on your grill on top
of the non-stick cooking surface(s). Use it
closed if
you would like to press the foods to be
grilled or open it at 180° angle if you would
like to cook on both cooking surfaces and
without pressing. To open the grill to a
180º angle simply press and hold down
the button and pull back the handle and
top grill to a completely open position (see
figure 2).
Figure 2