English - 1
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and/or injury to persons including the following:
1. Read all instructions before using this product.
2. This appliance generates heat during use. Do not touch hot surfaces. Use handles or
knobs.
3. To protect against electric shock, do not place or immerse cord, plugs, or appliance,
including the power base, in water or other liquid.
4. WARNING: The plug must be fully inserted into kettle. To ensure full insertion, verify
the marking on the plug is not visible. A loose contact may cause overheating.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting
on or taking off parts, and before cleaning.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Do not attempt to replace or
splice a damaged cord. Return appliance to the manufacturer (see warranty) for
examination, repair or adjustment.
7. The use of accessory attachments not recommended or sold by the manufacturer
may cause fire, electric shock or injury.
8. Do not use outdoors or for commercial purposes.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces, including
the stove.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Ensure that the kettle is properly located on the power base before switching ON.
Always attach plug to appliance first, then plug cord into the wall outlet (for appliances
with detachable cords). To disconnect, turn any control to OFF, then remove plug
from wall outlet. Do not disconnect by pulling on cord.
12. Do not use appliance for other than intended use. Misuse can cause injuries. Always
use appliance on a dry, stable, level surface. Keep the kettle away from the edge of
the countertop.
13. WARNING: Do not remove the lid while the water is boiling. All lids should be closed
during use.
14. Scalding may occur if the lid is removed during or immediately after the heating cycle.
Contents may be hot. Allow to cool before opening the lid. Keep spout away from
persons, as scalding can result from steam.
15. Do not exceed the MAX water level mark when filling. Overfilling could cause hot
water to boil out of the spout, which can cause burns.
16. The heating base and heating element is subject to residual heat following a heating
cycle. Do not touch heating base or heating element immediately after a heating
cycle. Allow to cool before handling.
17. Remove the kettle from power base before filling or pouring. Do not remove the kettle
from the power base until it is switched OFF, manually or automatically.
18. Use the kettle only with the power base provided.
19. Use extreme caution when handling, moving or pouring from the kettle containing
boiling water.
BVSTKED388R_S_V_19SEM2.indd 1
BVSTKED388R_S_V_19SEM2.indd 1
11/22/19 11:29
11/22/19 11:29
