4
5
Congratulations on your purchase of an Oster
®
Power Blender!
Please visit us at www.oster.co.kr.
1. Filler Cap – 60 ml filler cap doubles as a
measuring cup. Align notch with the hole
to insert in lid; turn clockwise to secure in
place.
Remove from lid to add ingredients while
blending.
2. Lid (Flap goes on opposite side of pour
spout) – Seals the jar.
3. Jar & Blade Assembly – 2L BPA-free
plastic jar with permanently attached
blade assembly.
4. Control Panel – Includes speed dial, 3
programmed settings and pulse.
5. Power Cord – 3-prong power cord.
6. Fuse – Incorporated to protect the motor
from overheating. If the motor shuts off
while in use: Turn control knob to “Off”
and unplug from the wall.
Remove jar from base and free blade of
any obstructions. Press external resettable
fuse button on the bottom of the base.
Wait 30-45 minutes for the unit to cool.
7. Cord Storage – Space on the bottom of the
base to store the cord while not in use.
8. Tamper – After blending has started,
remove the filler cap and place the tamper
through the opening in the lid to assist
with pushing the food down to the blade.
Note – the tamper is not long enough to
reach the blade.
Before you use the product for the first time,
separate the Tamper, Lid, Filler Cap, and Jar.
Wash in warm, soapy water. Rinse and dry well.
Learning About Your Product
Features and Assembly
1
2
3
4
5
6
7
8
PRODUCT STRUCTURE
USING YOUR PRODUCT CONTROL PANEL
A. Speed Dial – Turn dial clockwise to choose from manual speed settings
from “Low” to “High”. Once you select a speed, the blender will run
until you turn it back to “Off.”
B. Programmed Settings – In order to activate the programmed buttons, first
turn the speed dial counter-clockwise to the Programmed/Pulse Setting.
Then select the programmed button you would like to use. They have
been developed for optimal use when blending those types of foods.
Smoothie: 10 seconds to ramp up to “Medium”, 20 seconds on “High”.
Soup: 20 second ramp up to “Medium”, 5 minutes on “High”.
Dips/Spreads: 2 (10-second) pulses at “Medium-low”, 30 seconds on
“High”.
NOTE – if you would like to stop the blender in the middle of a
programmed cycle, simply press any button.
C. Pulse – Turn the speed dial counter-clockwise to the Programmed/Pulse
Setting. Then press the “Pulse” button for the desired time.
D. LED Lights – The lights around the selected programmed buttons will
pulse when the unit is operating in that mode.
E. Flashing Light – When speed dial is turned to the Programmed/Pulse
setting, the Pulse button light will flash red to indicate the unit is ready to
operate.
WARNING: Flashing light indicates ready to operate. Do not touch the
blade.
A
E
C
B
D
BLSTVB-071_13EKM1.indd 4-5
8/19/13 9:57 AM
