4
5
u
sIng
Y
our
B
lender
Clean blender according to the instructions in the “Cleaning and Storing
Your Blender” section.
Jar assembly:
1. Turn jar upside down so the small opening is at the top. (Figure 1)
2. Place sealing ring over jar opening. (Figure 1)
3. Place blade into jar. (Figure 2)
Figure 1
Figure 2
Figure 3
Figure 4
J
ar
F
eatures
Your new blender features a uniquely shaped oval jar that is designed to fit
in most refrigerator doors for convenient storage of drinks. This new jar
design creates a figure eight vortex ensuring that all ingredients are blended
efficiently for outstanding drink results.
Your new blender is equipped with a pitcher-style, flip-top lid so you don’t
have to remove the lid for pouring.
s
Peed
m
odes
: l
ow
, m
edIum
, H
IgH
• To blend in High Speed, press the “HIGH” button.
• To blend in Medium Speed, press the “MED” button.
• To blend in Low Speed, press the “LOW” button.
• To Stop blending, press the “ON/OFF” button. The motor will come
to a stop. (Pressing the “ON/OFF” button stops the motor and turns off
the blender.)
• You can move between speeds at any time while blending by pressing any
of the other speed buttons. The new speed will start without interruption.
• Pressing the “PULSE” Button will give a momentary pulse at high speed.
The motor will then stop.
NOTE: Pressing the “ICE CRUSH or DRINKS” or the Speed button at
which it is blending will also stop the motor.
P
re
-P
rogrammed
s
ettIngs
Your new blender features 2 Pre-Programmed Settings:
“Ice Crush” and “Drinks”.
• The “ICE CRUSH” setting is ideal for crushing larger quantities of ice.
The “ICE CRUSH” mode pulses between high and off for 30 seconds and
will automatically shut off at the end of the cycle.
• The “DRINKS” setting is designed for perfectly blended frozen drinks.
The “DRINKS” setting runs on high speed for 45 seconds and will
automatically shut off at the end of the cycle.
• To stop blending in either of these settings, press the “ON/OFF” button.
The motor will come to a stop. (pressing the “ON/OFF” button stops the
motor and turns the blender off.)
• Pressing the “PULSE” button will give a momentary pulse at high speed.
The motor will then stop.
4. Place threaded jar nut over blade and jar. Place the threaded jar nut on
jar and turn it clockwise to tighten. (Figure 3)
5. Place jar assembly onto base. (Figure 4)
6. Place ingredients into jar according to your recipe. For best results always
add liquids first when blending.
7. Place pour through lid on jar.
8. Plug the power cord into a 120 Volt AC electrical outlet.
9. Touch the “POWER” button to turn the product on. The LED Indicator
will flash red (and continue to flash) indicating it is ready to operate. You
are now ready to blend. Avoid contact with blades and moveable parts.
BLSTDG-Series_IB rev.indd 4-5
6/25/09 10:59:05 AM
