3
.
Keypad and Display Menus
3.1
Keypad
UP
• increases the digit under the cursor
DOWN
• decreases the digit under the cursor
LEFT
• moves to the previous input field, unsaved changes are discarded
RIGHT
• moves to the next input field, unsaved changes are discarded
OK or Enter
• triggers actions
• toggles checkboxes
• saves a changed value
• moves the cursor position if pressed on an unchanged or already
saved value
3.2
Display
Menus
After power-on, the main menu is shown on the display. Some fields can be used to
change settings of the device, others only show the current values. You can switch to
the next menu with the arrow in the upper right corner. The laser menu is next. Then
follow the TEC menus. The last menu is the device menu for general settings.
3.2.1
Main
Menu
The main menu gives an overview over the current state and allows you to control basic
settings. The layout of the main menu depends on the model. It is shown in
The large number show the present laser current in laser drivers and the current
temperature in TEC controllers. The following fields may be available in the main menu:
11
