5
PB
Weight kg
45-
52
53-
59
60-
68
69-
77
78-
88
89-
100
101-
116
117-
125
Weight lbs
99-
115
116-
130
131-
150
151-
170
171-
194
195-
220
221-
256
257-
275
Low Impact Level
Size 22
1
1
2
3
4
N/A
N/A
N/A
Size 23-24
1
1
2
3
4
5
N/A
N/A
Size 25-26
2
2
2
3
4
5
6
7
Size 27-28
3
3
3
3
4
5
6
7
Size 29-30
4
4
4
4
4
5
6
7
Moderate Impact Level
Size 22
1
2
3
4
N/A
N/A
N/A
N/A
Size 23-24
1
2
3
4
5
N/A
N/A
N/A
Size 25-26
2
2
3
4
5
6
7
N/A
Size 27-28
3
3
3
4
5
6
7
N/A
Size 29-30
4
4
4
4
5
6
7
N/A
ASSEMBLY INSTRUCTIONS
Foot Cover and Spectra Sock
(Fig. 2)
Caution:
To avoid pinching fingers, always use a shoehorn.
1. Put the foot into the Spectra Sock.
2. Remove the foot cover attachment.
3. Use the applicable (straight) end of a shoehorn to put the foot with
the Spectra Sock into the Foot Cover.
4. Move the shoehorn up to fully push the foot into the Foot Cover.
5. Put the foot cover attachment back onto the Foot Cover.
6. After alignment is complete, fix the Spectra Sock to the prosthesis to
seal against dust and dirt.
Note:
The Spectra Sock must be pulled up to prevent it from interfering
with moving parts of the foot.
If required doff the Foot Cover as follows:
1. Remove the foot cover attachment.
2. Insert the applicable (edged) end of a shoehorn behind the foot.
3. Push the shoehorn down and pull the foot out of the Foot Cover.
4. Fully remove the Spectra Sock.
Prosthesis
Assemble prosthesis with applicable devices.
Warning:
Risk of structural failure. Components from other
manufacturers have not been tested and may cause excessive load on the
device.
Warning:
Ensure proper attachment by following the applicable device
assembly instructions.
Caution:
The Supporting Link is not adjustable. Do not adjust.
Caution:
Do not use heel wedges. Heel wedges will cause premature wear
and tear.
Remove the protective film on the pyramid after fitting.
