14
COMPLIANCE
This component has been tested according to ISO 10328 standard to three million load cycles. Depending on the
amputee’s activity this corresponds to a duration of use of three to five years. We recommend carrying out regular
yearly safety checks
ISO 10328 - P6 - 165 kg *)
*) Body mass limit not to be exceed!
For specific conditions and limitations of use see
manufacturer’s written instructions on intended use!
BLUETOOTH MODULES REGULATED INFORMATION
This device contains the following radio frequency transmitters:
USA-FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause harmful interference to radio communications. However,
there is no ensured specification that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Caution: Exposure to Radio Frequency Radiation.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Canada – Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of
this device.”
Model
Type and Frequency
Characteristics
Effective Radiated Power
Bluetooth 2.1 Module:
Model: KC22
FID 2402 MHz ~2480 MHz
(1 MHz Interval, 79 Channels)
0.0025 W
