10 of 27
11 of 27
2.4 Magnetic charge port
It is important to provide sufficient space for the charge
port between the inner and outer sockets.
When fabricating the outer socket the magnetic charger
fabrication dummy should be used. The dummy is in 3
parts:
Dummy 1: is the thickest dummy. It is used to ensure
sufficient clearance within the outer socket/frame for the
magnetic charger port.
Dummy 2: has the central hole. It creates the step to re-
cess the magnetic charge port.
Dummy 3: is the ring. It is used after lamination to create
the necessary hole.
1. Position the dummies in
desired location during prepara-
tion for final lamination, dummy
1 should be recessed within the
outer socket/frame build down.
2. Position dummy 2 prior to ap-
plying final two fabric layers.
Laminate as normal.
3. Once laminated, grind surface
to expose dummy 2.
Drill through central hole of
dummy 2.
4. Remove dummy 2 and insert
dummy 3.
5. Grind lamination to create hole.
Remove dummy 3.
6. Insert magnetic charge port
securing in position with silicone
adhesive.
Dummy 1
Dummy 2
Dummy 3
