Ossur i-digits, User Manual

Page: 9 / 20

8 of 20 9 of 20
UK
Europe
USA and Japan
Fig. 6: batteries
2.3 Battery Charging
i-digits™ is powered by two, 800mAh, 3.7 Volt batteries
which have been specifically designed to meet the power
requirements of i-digits™ devices. Four batteries are pro-
vided, two for the wristband and two spares. Two 3.7 V bat-
teries will be needed with the wristband (the wristband will
not work with only one battery).
Each battery is equipped with a LED display alerting you
when the battery is low on charge. If the battery is low on
charge the LED will illuminate RED. The LED will remain
illuminated until the battery is adequately charged.
Only use supplied Touch Bionics charger
to charge batteries. Depending on your
location, you will receive one of the chargers
shown (fig. 7).
If you intend to travel outside of your home country you will
need to ensure that you have a Touch Bionics charger that
will work in the country to which you are traveling. Addi-
tional chargers are available from Touch Bionics (see fig.7).
As an alternative to charging directly from domes-
tic power, a car charger is also provided with the
i-digits™.
Fig. 7: charger
Fig. 8: car charger