Ossila Dip Coater
User Manual
ossila.com
24
Ossila Limited © 2017
7.
To change the
‘
Drying Gap
’
value, navigate by pressing the
down
button, and press the
OK
button to edit the value. Press the
up
or
down
button to increase or decrease the value.
Press
OK
again to exit the edit mode. The maximum drying gap is
50 mm
, and the default
value is
5 mm
.
Note: The default
‘
Drying Gap
’
is 5 mm. The value will reset every time the Dip Coater is
switched OFF.
Note: The maximum travel distance of the system is 100mm. Any increases in coating length
value (in (Step 2.) and Drying Gap should be within this maximum travel distance. The coating
length will be auto-corrected if the added value is more than 100mm.
