OSS OSS-PCIE4-ADPT-X16-M.2-2 User Manual Download Page 3

Page: 3 / 27

One Stop Systems

OSS-PCIe4-ADPT-x8-M.2-2

Using Device Manager ............................................................................................................................................................................ 18

6.2

Using Disk Management ......................................................................................................................................................................... 19

6.3

Check Temperature ................................................................................................................................................................................. 19

Verify OSS Device on Linux OS .......................................................................................................................................20

7.1

Linux Commands ..................................................................................................................................................................................... 20

7.1

Check Temperature ................................................................................................................................................................................. 22

7.2

Check Speed and Link width .................................................................................................................................................................... 22

7.3

PCIe Device Detailed Info ........................................................................................................................................................................ 23

7.4

Smartctl ................................................................................................................................................................................................... 24

Contacting Technical Support ........................................................................................................................................25

Returning Merchandise to One Stop Systems ................................................................................................................25

Shipping / transporting the card ....................................................................................................................................26

APPENDIX A Compliance .............................................................................................................................................26

Summary of Contents for OSS-PCIE4-ADPT-X16-M.2-2




























Search results

Summary of Contents for OSS-PCIE4-ADPT-X16-M.2-2

Reviews:

Related manuals for OSS-PCIE4-ADPT-X16-M.2-2

Brands by name

Popular brands

OSS OSS-PCIE4-ADPT-X16-M.2-2, User Manual

Search results

Summary of Contents for OSS-PCIE4-ADPT-X16-M.2-2

Reviews:

Related manuals for OSS-PCIE4-ADPT-X16-M.2-2

Brands by name

Popular brands