One Stop Systems
OSS-PCIe4-ADPT-x8-M.2-2
14
Slowly insert the media at ~30 degree position into the connector socket until it is fully seated inside the connector.
4.7
Secure the Media
Secure the M.2 media onto the circuit board
Follow the steps below on how to install the canister in the PCIe card carrier and hot to plug in the PCIe cards in the computer.
4.8
Turn OFF computer
Prior to installing the OSS-537 board make sure to turn OFF or power down the computer.
4.9
Remove Computer’s top cover
Remove the top cover of the computer to gain access to the motherboard.
4.10 Remove PCIe slot cover
Locate an unused PCI express 1x6 slot and remove the corresponding slot cover from computer chassis.
