One Stop Systems
OSS-581 Gen5 BP
3
1
Getting Started
This is section is all about the steps on how to install the backplane. You will find instructions for the following procedures:
•
Unpacking
•
Upstream and Downstream Slots
•
Hardware Requirements
•
Backplane Installation
•
Cable Adapter Card Installation
•
Link Cable Installation
•
Powering Up the unit / system
•
Verify Device Installation
2
Unpacking
Check and identify the standard supplied item. Inspect the backplane for physical defects and damages.
•
To achieve superior performance and reliability it is recommended to use a certified and compatible set of an OSS
Gen5 adapter cards (aka: Host Interface Board) and
c
ables.
•
The OSS backplane is designed and programmed to work with OSS Gen5 adapter cards (also backward compatible with
Gen4 adapter card).
