Operating instructions: Mini Remote Control DALI RMC – M ADVANCED
Page 5
For information on how to train the radio actuators to recognise the hand-held transmitter, please see
the operating instructions for the universal radio-controlled dimmer and for the radio-controlled louvre
blind actuator.
Deleting channels:
Channels that have been programmed can be deleted in the "Untrain Channel" menu option on the
manual programming unit (see the operating instructions for the manual programming unit).
3.
Operation
Each channel has two buttons (/\ and \/). Pressing on (/\) for no more than 1 second will switch the
lighting system on. Pressing on (\/) briefly will switch it off. Holding down (/\) for more than 1 second
will fade the lighting system up; holding down (\/) will fade it down.
When operating the louvre blind actuator, a short press will change the angle of the louvres, whereas
a long press will raise or lower the blinds.
Note: The maximum duration of transmission is 12 seconds, even if a button is held down for longer.
If the unit fails to achieve its usual range you should replace the battery.
4.
Changing the battery
The hand-held transmitter operates on one CR 2032 lithium button cell (included).
Notes of risks and disposal:
Important: Keep batteries away from children. If a button cell is swallowed, seek medical
attention immediately.
The old battery should be removed immediately and disposed of properly.
Replace the battery with one of the same type.
Changing the battery
To avoid damaging the electronics through electrostatic discharge, you must comply with the safety
precautions for electrostatically sensitive devices when changing the battery.