Osram CJ3000, User Information

Page: 7 / 24

7
XTYLOS
6
1
2
3
2
1
7
3. INSTALLATION AND START-UP
Connecting and disconnecting power cable
- Fig. 7
Installing the luminaire - Fig. 6
The luminaire can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING:
the luminaire must always be securely mounted and immobilized, also when installed on the floor, in a way that accidental
redirection of the fixture is not occurring.
WARNING:
with the exception of when the luminaire is positioned on the floor, the safety cable must be fitted. (Cod. 105041/001 available on request).
This must be securely fixed to the support structure of the luminaire and then connected to the fixing point at the centre of the base.
3.1 Installing the fixture
3.2 Connecting to mains supply
WARNING:
Operators shall control access to the beam within the hazard distance or install the product at the height that will
prevent spectators’ eyes from being within the hazard distance.
Continue ➔