POCO CHILD CARRIER SERIES
6
WARNING Child must not be in the carrier during the adult fit process.
HIPBELT SIZING
26"–48" / 66cm–122cm
TORSO SIZING
15"–21” / 38cm–53cm
2.1
Loosen the harness, hipbelt and
load lifter straps.
2.5
After fitting the hipbelt, tighten the
shoulder harness by pulling the
straps down and back.
2.6
When properly fitted the shoulder
harness yoke should rest 1-2
inches/2.5-5 centimeters below
your C7 vertebra (the bump at the
base of your neck).
2.7
Take the pack off and completely
loosen the pack’s load lifters and
harness straps.
2.8
Lift up on the torso adjustment cam
in the center of the backpanel and
slide the shoulder harness up or
down to the correct torso length.
2.2
Put the pack on and place the hipbelt
centered over the hipbones. Buckle
and tighten the hipbelt.
2.3
After tightening there should be 3-6 inches/8-15 centimeters between
both hipbelt wings. The Fit-on-the-Fly feature on the Poco Plus model
provides additional hipbelt adjustment for a custom fit.
2.4
Poco Plus Only - Separate hook and loop fabric closure between interior
hipbelt mesh and extension wing. Slide the extension wings in or out to
achieve proper fit and ensure both wings extend the same length for proper
load distribution using size arrows as a guide. Press firmly to reengage the
hook and loop.
2.9
Push the adjustment cam down to
lock the backpanel into position.
Your child carrier is now fitted to
the adult.
FIT THE HIPBELT
FIT THE BACKPANEL AND HARNESS
TO ADJUST THE FIT-ON-THE-FLY HIPBELT, FOLLOW THESE STEPS:
TO ADJUST THE TORSO LENGTH, FOLLOW THESE STEPS:
2. FIT THE ADULT
