POCO AG
™
SERIES
3
WARNING Child must not be in the carrier during the adult fit process.
HIPBELT SIZING
26"–48" / 66cm–122cm
TORSO SIZING
15.5"–21.5” / 39.5cm–54.5cm (all Poco AG
TM
styles)
2.1
Loosen the harness, hipbelt and
load lifter straps.
2.5
With the pack on and hipbelt fitted,
tighten the shoulder harness straps
by pulling them down and back.
2.6
For proper torso fit, your C7 vertebra
(bump at the base of your neck)
should be located 1–2 inches / 2.5–5
centimeters above the top edge of
the shoulder harness yoke.
2.7
Take the pack off and completely
loosen the pack’s load lifters and
harness straps.
2.8
Locate the torso adjustment cam at
the center of the backpanel and
lift up to release. Slide the shoulder
harness up or down to the correct
torso length.
2.2
Put the pack on and place the hipbelt
centered over the hipbones. Buckle
and tighten the hipbelt.
2.3
The ends of each hipbelt should be 3–6 inches / 8–15 centimeters from
each other for a correct fit. Make adjustments to the sizing of the hipbelt
utilizing the Fit-on-the-Fly™ hipbelt extensions to achieve proper fit.
2.4
Release the extension wings by separating the hook and loop fabric closure
between the interior hipbelt mesh and the extension wing. Slide the extension
wings in or out to adjust the hipbelt position. Extend the wings the same
distance on both sides using the size arrows for guidance to ensure the pack’s
weight is evenly distributed. Press firmly to reengage the hook and loop.
2.9
Push down the torso adjustment
cam to lock it into position. Your child
carrier is now fitted to the adult.
FIT THE HIPBELT
FIT THE BACKPANEL AND HARNESS
TO ADJUST THE FIT-ON-THE-FLY™ HIPBELT, FOLLOW THESE STEPS:
TO ADJUST THE TORSO LENGTH, FOLLOW THESE STEPS:
ASSEMBLY
2. FIT THE ADULT
