background image

 2 

1

OSP HOME FURNISHINGS OFFICE CHAIRS LIMITED WARRANTY

 • 2 Years on all non-moving metal parts.

 • 1 Year on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.

 • 1 Year on upholstery fabric and foam against wear and deterioration.

 • We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in normal use.

All warranties are limited to the original purchaser for normal Residential usage by persons weighing 250 lbs. or less.

This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature 

or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal 

use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. This 

warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged 

or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail [email protected], by 

Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.

To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return 

authorization. At its option OSP Home Furnishings will:

(a) Supply compatible components of current manufacture.

(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on 

components still in warranty will be paid by OSP Home Furnishings.

1.

 Do not use this product unless all screws and bolts are securely tightened.

2.

 Check that all screws and bolts are tight every three months or as needed.

3

. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.

4.

 Do not use this product as a stepladder.

5.

 Use this product for its intended purpose only.

6. FOR INDOOR RESIDENTIAL USE ONLY.

FEATURES
•  PNEUMATIC SEAT HEIGHT ADJUSTMENT

To raise seat remove pressure from seat and pull lever (1) up. 
To lower seat height sit on chair and pull lever (1) up. 

NOTE:

 It is normal for chair to slightly lower under body weight.

• LOCKING TILT ADJUSTMENT

For individual comfort, this chair has been equipped with an 
adjustment that will allow the user to change the tension of the 
tilting feature.  Turn knob (2) clockwise to increase tension and 
counter-clockwise to decrease or ease the tension. To lock return 
chair to the upright position and push lever (1) in. To unlock pull 
lever (1) out.

NOTE:

 Be careful not to loosen back tilt adjustment knob completely. 

• FLIP ARM

To flip arms up, simply pull up on arm. To lower arm, simply pull 
down on arm.

• LED LIGHTING & ADJUSTMENT

Use LED controller to change the LED light colors.

Summary of Contents for INP25








Reviews: