oska.uk.com | 0845 381 0600
5
SYSTEM SET-UP
Place the pump on horizontal surface or hang by means of the hooks.
Place the seat cushion on the chair Air tubes should be at the rear of the chair
unless there are no openings at the rear of the chair. Please ensure that the
cushion is fully stable on the chair.
Connect air feed tubes to air outlet on the seat cushion (see 3a) and pump (see
3b), ensuring that the tubes are not twisted or “kinked”. Allow space for tubes to
drop freely.
Switch on the pump power (see 4). The power switch indicator should now
illuminate, and the pump will start to inflate the cushion.
The low pressure indicator (see 5) will illuminate as inflation takes place.
The audible alarm won’t alarm within 60 minutes but will be activated if the
pressure remains low inside the cushion. In the case of low pressure check the
connections and the products. Press the alarm reset button (see 6) to mute the
audible alarm, its indicator will flash.
3B
