OSKA C Air Series, User Manual

Page: 4 / 12

SeriesC Air Cushion User Guide
System set-up
01. Place the pump on horizontal surface or
hang by means of the hooks.
02. Place the seat cushion on the chair air tubes
should be at the rear of the chair unless
there are no openings at the rear of the chair.
Please ensure that the cushion is fully stable
on the chair.
03. Connect air feed tubes to air outlet on the
seat cushion (see 1a) and pump (see 1b),
ensuring that the tubes are not twisted or
“kinked”. Allow space for tubes to drop
freely.
04. Switch on the pump power (see 2).
The power switch indicator should now
illuminate, and the pump will start to inflate
the cushion.
05. The low pressure indicator (see 3) will
illuminate as inflation takes place.
06. The audible alarm won’t alarm within 60
minutes but will be activated if the pressure
remains low inside the cushion. In the case of
low pressure check the connections and the
products. Press the alarm reset button (see
4) to mute the audible alarm, its indicator will
flash.
1A