Ambulatory Blood Pressure Report Generator
1-11
Report Generator
To Print Patient Reports from a Data Card
1
Insert the data card into the report generator card slot.
2
Each patient report that is copied onto a data card is numbered sequentially. This number is
used to select each report for printing. If the sequential number of the report to be printed is
already known, move ahead to step 3. If not, use the left UP or DOWN arrow key to select menu
item 39, and then press ENTER. This prints a list of the patient reports on the data card along
with their sequential numbers.
3
Select menu item 40 and use the right UP or DOWN arrow key to select the sequential number
of the first patient data report to be printed. Press ENTER to transfer this number to the print
queue, which is a list of the patient data reports to be printed. Additional patient data reports
can be added to the print queue by selecting their numbers and pressing ENTER.
4
To verify the report numbers in the print queue prior to printing, use the left UP or DOWN arrow
key to select menu item 40, then use the right UP or DOWN arrow key to select 00. Press
ENTER to print a list of all report numbers that are in the queue ready for printing.
5
To print all the patient reports in the print queue, press the PRINT REPORT key.
Note:
To abort printing a patient report, press the PRINT REPORT key a second time.
Printing and Copying a Patient Report
To print a patient report prior to copying it to a data card:
1
Press the PRINT REPORT key without inserting the data card.
2
After the data has been printed, insert the data card into the card slot (the data key must also
be connected), and then press the PRINT REPORT key.
Reverse steps 1 and 2 if patient data is to be copied to a data card first and then printed.
