Oshkosh JLG 1500SJ, Service And Maintenance Manual

Page: 177 / 706

SECTION 3 - CHASSIS & TURNTABLE
3121262 – JLG Lift – 3-127
2. Using a suitable oil filter removal tool, loosen the lube oil
filter cartridge and spin off.
3. Catch any escaping oil.
4. Clean any dirt from the filter carrier sealing surface.
5. Lightly oil the rubber gasket on the new oil filter.
6. Manually screw in the new filter until the gasket is flush.
7. Tighten the filter another half-turn.
8. Check the oil level.
9. Check the oil pressure.
10. Check the oil filter cartridge and make sure there are no
leaks.
Replacing the Fuel Filter
WHEN WORKING ON THE FUEL SYSTEM, MAKE SURE THERE ARE NO OPEN
FLAMES OR SPARKS IN THE AREA. DO NOT SMOKE WHEN WORKING ON THE
FUEL SYSTEM.
1. Wipe the area around the filter to clean any dirt from the
area.
2. Undo the fuel filter cartridge and spin off.
3. Catch any escaping fuel.
4. Clean any dirt from the filter carrier sealing surface.
5. Apply a light film of oil or diesel fuel to the rubber gas-
ket of the new filter cartridge.
6. Manually screw in the new filter until the gasket is flush.
7. Tighten the fuel filter cartridge with a final half-turn.
8. Open the fuel shut-off valve.
9. Check for leaks.