SECTION 1 - SAFETY PRECAUTIONS
31215862
1-7
•
If the mast assembly or platform is caught so that one or more
wheels are off the ground, platform personnel must be removed
before attempting to free the machine. Use cranes, forklift trucks,
or other appropriate equipment to stabilize machine and remove
personnel.
Crushing and Collision Hazards
•
Approved head gear must be worn by all operating and ground
personnel.
•
Watch for obstructions around machine and overhead when driv
-
ing. Check clearances above, on sides, and bottom of platform
when lifting or lowering platform.
•
During operation, keep all body parts inside platform railing.
•
Keep non-operating personnel at least 6 ft. (1.8m) away from
machine during all operations.
•
When moving the machine, the operator must limit travel speed
according to conditions of ground surface, congestion, visibility,
slope, location of personnel, and other factors.
•
Exercise extreme caution at all times to prevent obstacles from
striking or interfering with operating controls and persons in the
platform.
•
Ensure that operators of other overhead and floor level machines
are aware of the aerial work platform’s presence. Disconnect
power to overhead cranes. Barricade floor area if necessary.
•
Do not operate over ground personnel. Warn personnel not to
work, stand, or walk under a raised platform. Position barricades
on floor as necessary.
To
order
go
to
Discount-Equipment.com
