SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-10
31215036
17. Turntable
- See Inspection Note.
18. Ground Control Console
- Switches and levers return to
neutral when activated and released, decals/placards secure
and legible, control markings legible.
19. Fuel Tank
- See Inspection Note.
20. Swing Drive Motor and Brake
- See Inspection Note.
21. Main Control Valve
- See Inspection Note.
22. Turntable Bearing
- Evidence of proper lubrication. No evi
-
dence of loose bolts or looseness between bearing and
structure.
23. Frame
- See Inspection Note.
24. Power Track
- See Inspection Note.
Function Check
Perform the Function Check as follows:
1.
From the ground control panel with no load in the platform:
a.
Ensure that all machine functions are disabled when
the Emergency Stop Button is pushed in.
b.
Ensure all functions stop when the function switch is
released.
c.
Operate all functions and check all limiting and cut-out
switches to ensure proper operation. All boom sections
should extend/retract together at the same rate of
speed. Any difference would indicate delayed move
-
ment and loose wire ropes.
d.
Ensure proper operation of the manual descent con
-
trols, as described in Section 5.5 of this manual.
IF DELAYED MOVEMENT IS DETECTED IN WIRE ROPE OPERATION, LOWER PLATFORM
TO STOWED POSITION, SHUT DOWN MACHINE, AND HAVE WIRE ROPES INSPECTED/
SERVICED BY A FACTORY TRAINED SERVICE TECHNICIAN. LOOSE OR MISADJUSTED
WIRE ROPES COULD RESULT IN SERIOUS INJURY OR DEATH.
To
order go
to
Discount-Equipment.com
