Adjusting SENSITIVITY
After you become familiar with how your detector works, it’s important
to fine tune the sensitivity to get a good effect.
Press MENU to select SENS. Then press + or - to increase or
decrease the sensitivity. The level will be displayed on the LCD.
Note:
In order to detect the target deeply buried, you can adjust the SENS to
a high level. But not to set the level of SENS to Max. position, or the
detector will receive interference and false signal from broadcast
antenna and other electronic lines. The detector will have unstable and
irregular indications.
Using LIGHT
In dark area, you can use LIGHT for better searching. Press MENU to
select LIGHT. Then press + or – to adjust the level (0-9 ) of LIGHT.
The level will be displayed on the LCD.
Note: As the light consumes more power, we suggest you setting the
value to 0 in normal environment.
6.Factors That Affect The Detecting
It’s difficult to have an accurate detecting result. Sometimes the
detecting may be restricted by some factors:
The angle of the target buried in the soil.
The depth of the target.
The level of oxidization of the target.
The size of the target.
Electro-magnetic and electrical interference surrounding the
target.
8
