NOTCH:
Eliminates the target you don’t want. Press MENU to
select NOTCH.Then press+or–to select the target to be notched.
The cursor above the selected target will flash.PressNOTCHagain,
the target name below the cursor will disappear.
PP:
Pinpoints the location of the target accurately.
LIGHT:
Press MENU to select LIGHT. Then press + or – to adjust
the level (0-9 ) of LIGHT. The level will be displayed on the LCD.
Note:
As the backlight consumes more power, it’s better to turn off
it in light places.
④
MEMORY
The detector will memorize all the settings before power is off.
4.TESTING AND USING THE DETECTOR
A.INDOOR TESTING AND USE
1.Rotate the volume control away from OFF to power on the detector.
2.Follow the instructions described in OPERATION to set the
SENSITIVITY,VOLUME,DISC,NOTCH and operation mode.
3.Place the detector on a wooden or plastic table, then remove any
watches, rings, or metal jewelry you are wearing.
4.Adjust the search coil so the flat part points towards the ceiling.
Note:
Never test the detector on a floor inside a building. Most buildings
have metal of some kind in the floor, which might interfere with the
objects you’re testing or mask the signal completely.
If you are using a coin, the detector will detect it more easily if you hold
it so a flat side is parallel with the flat side of the search coil. A sweep
with the side of coin over search coil might cause false indication and
unstable display of target.
5
