Operating manual external touch control panel (Smart) Page: 9 of 14
Service functions
The second display settings screen contains utility functions. The menu is initially
locked to prevent accidental changes. Press the key symbol for 3 seconds to
unlock.
Touch screen calibration
In this menu you can calibrate the touchscreen. Calibration of the display is
required if the device does not correctly recognize finger touches.
To perform the calibration, follow the on-screen instructions, three times touch the
squares in different places on the screen, and save the calibration results by
pressing the "OK" button.
Factory settings
By pressing the "YES" key, all user parameters are reset to the factory settings. All
operational logs remain unchanged.
Network settings
The factory LAN settings of the smart touch device enable plug-and-play remote
control. If necessary, you can set the IP address manually and prevent the device
from communicating with the OSF communication server. (For details, see
"Internet Connection" section.) Access to change settings via LAN is restricted by a
PIN code, which can be viewed and changed here.
Menus of the connected devices
Euromatik.net
The menu structure of the Euromatik.net control unit on the external smart touch panel largely repeats the
structure of the display menu on Euromatik.net's own display and shows the most important and required
parameters and settings.
Swimming pool cover
Before operating these switches, the swimming pool must be subjected to a
visual inspection. The swimming pool cover may only be moved if it is certain that
