5.1 – Here the throttle is removed from the
OSET. In 99.9% of cases faults with throttle will
be a direct result of the bike being dropped on
its right hand side. While there may be no
visible damage, the resistor in the throttle
body could have been damaged, resulting in
either an intermittent message to the
controller or no message at all.
Tip – A good little modification you can do on all OSET Bikes is to fit a pair of standard off-road motorcycle grips.
This can be done by using a sharp blade to cut down the seam of the standard grip. The grip can be peeled off and a
new grip fitted. In doing this you will now be able to fit a standard mountain bike bar end into the handlebar. Now in
the event of a crash or mishap the throttle body will be protected.
29
Summary of Contents for 2012 12.5 24V
Page 31: ...31...
