6. LED bar running during connecting with App.
5. The measurement completed. (show weight reading)
7. Turning off automatically after transmitting .
Operating Instructions
Note:
The unit will shut down automatically if the weighing data can’t be transmitted in 30 seconds .
1. Place the unit on a hard, flat surface .
3. Step on the scale, LED bar will flash twice then
display user’s weight.
2. Run o’care APP and enter “ ” bubble .
4. Measuring Body Composition .
2.1 Measuring Body Composition
Note:
If you didn’t step on the scale but LED bar is flashing , please await till the LED turn off or re-install the batteries. Such occasional display
might be caused by the interference of environment; however, it won’t cause the FTG-315 permanently damage / malfunction and, is no
related with the basic safety.
Place the unit on a hard, flat surface to avoid inaccurate measurement.
16
17
5
6
6
5 SEC. OFF
---
kcal
---
kcal
---
LV
---
%
---
kg
Today
Weight
2
1
3
STEP ON
4
