OSEE RMM1024, User Manual, Page: 57 / 71

Network Control
51
2.
Input Source Selection Button
It is used to selecting an input source as the input signal, such as: SDI1,
SDI2, LINE1, LINE2, HDMI. The selecting box of "Apply to All" at the
right side is used to synchronize the settings of a monitor to another
monitor.
3.
Navigation menu list
It shows the navigation menus: STATUS , ADJUST , VIDEO DISPLAY ,
INPUT SETUP , MARKER , AUDIO, DISPLAY , CLOSE CAPTION ,
USER CONFIG , COLOR TEMPERATURE , FUNCTION KEY , IMD and
SYSTEM . Click the navigation menu, it will show the corresponding
settings on the right side. The menu items in main menu on screen
display are mostly as the same as the menu items listed in navigation
menus except
SYSTEM .
4.
Parameter list
It shows the parameter names, values and operation buttons of the
selected navigation menu, as shown in the red rectangle in Figure 6.2-2.
The title in the yellow rectangle of the parameter list and the parameter
list will change with the navigation menu when switched.
Figure 6.2-2 Parameter List