OSEE RMM1024, User Manual, Page: 22 / 71

RMM1024 Features
16
8.
Ethernet
9.
RS485 In/Out
10.
Tally Input
4.2.2 Operations of Rear Panel
The details of these interfaces at the rear panel are described as follows:
1.
Power Input
It provides one power input interface, the specification is 5~12VDC. The
corresponding indicator is at the front panel. If the light is green, the
monitor is powered on, if the light is flashing, the monitor is standby, and
if the light is off, the monitor is powered off.

Only use the adapter and the power cord specified by the manufacture for
your safety
！
2.
Video Input Interface (BNC)
It provides two SDI input interfaces, one is labeled as SDI1 IN, and the
other is SDI2 IN, 800mVp-p +/-10%.
3.
Video Output Interface (BNC)
It provides two SDI output interfaces. One is labeled as SDI1 OUT, the
other is SDI2 OUT, 800mVp-p +/-10%, active loop.
4.
HDMI
It provides one HDMI input interface, HDMI Type-A connector with a
fastener.
5.
Video Input Interface (BNC)
It provides two SDI input interfaces. One is labeled as LINE IN1, and the
other is LINE IN2, 1Vp-p +/-3dB, sync negative.
6.
Audio Output interface
It provides two audio output interfaces, 5dBu, impedance
≤
500
Ω
, RCA
connector.
7.
Audio Input interface
It provides four audio input interfaces, 5dBu, impedance ≥ 47K, RCA
connector.