MVM230 Quad Split LCD Monitor
User Manual
—
6
—
Chapter 3 Unpackaging and installation
Opening the box, please check whether the device has been damaged during transport. Check all
the things listed on the packing list are received. If there is any missing, contact your distributors
or OSEE for it.
We recommend that you should save the packing materials for future needs.
1.
Install the base.
Installation
2.
Put the MVM230 on the position you need for installing, and connect the power. Please
make sure the place you put is safety.
3.
Connect a standard signal lines to the corresponding input port. All BNC connector
impedance must be 75
Ω
.
Note: Please use the power adapter supplied to avoid unnecessary trouble.
4.
Use the power adapter and cord to connect single-phase three-wire AC power or following
the local power supply conditions. Make sure the power cord grounding well.
5.
Finally, turn on the power switch, so that the device will be ready for work.
Packing List:
NO. Detail
list
Quantity
1 Host
1
2 Base
1
3
Accessory warranty
card
1
the base installation instruction
1
User manual
1