
MVM230 Quad Split LCD Monitor
User Manual
—
23
—
Display.
Press ENTER to edit the IMD name, Use UP and
DOWN to select characters, Press ENTER to go to
next cursor, Press MENU to exit editor.
BAUD RATE
19200
9600/19200/38400
TSL V3.1 and TSL V4.0 is 38400, Image video is one
of the 9600/19200/38400.
LED TLY
OFF
ON/OFF
Set the LED Tally ON or OFF.
OSD TLY MODE
OFF
RG/GR/RGY/OFF
Use this setting to choose OSD Tally Mode, Only the
TALLY SOURCE is STANDARD or
SIV422, the setting is available.
IMD TLY MODE
T1
T1/T2/T1T2/T2T1/T1-/T2-/T1T2-/T2T1-
Use this setting when using the Image Video tally
control; this setting will determine the state which is
selected.
TLY SOURCE
STANDARD
STANDARD/ IMAGE VIDEO 422/TSL
STANDARD: Use the Standard setting to control tally
via contact closure on GPI tally.
IMAGE VIDEO 422: Use the setting to control tally
state via 422 ports, GPI toggle is no available.
TSL: Use the TSL 422 setting to control OSD and
LED tally via the TSL serial protocol.
6.2 Function menu
*F1/F2
When the main menu does not appear, pressing F1 or F2 key it will display the shortcuts menu.
About F1/F2 key setup please refers to the
USER CONFIG
of the main menu item.
Press F1 or F2 to enter the function menu. It displays as follow:
*DVI
Press the DVI key for 5s above, it will enable reset function to restore all settings to factory
default settings.