OSEE LMW-156H, User Manual

Page: 13 / 35

LMW156 SERIES LCD MONITOR User Manual
— 9 —
4.4 Location and Function of Control Buttons And Knobs On Front Panel
F
（
1
）
POWER : Power Standby / ON Switch
Press this switch to turn on the power of this unit or to set this unit in the standby mode(the
O
/
–
power switch on the rear panel is turned on).
Last settings recall with power.
Unlit: The monitor is completely off (mains switch is off).
Lights in Green: The monitor is on.
Lights in Red: The monitor is off (standby).
F
（
2
）
I NHIBIT Indicator
Lights in orange when the key inhibit is set to ON.
(For more information, refer to the CONTROL menu of chapter 6).
F
（
3
）
SDI 1 Button/Lamp
Press the button to monitor the signal through the SDI1 terminal.
When the button is pressed, the SDI1 button lamp will
light.
F
（
4
）
SDI 2 Button/Lamp
Press the button to monitor the signal through the SDI2 terminal.
When the button is pressed, the SDI2 button lamp will
light.
F
（
5
）
LINE 1 Button/Lamp
Press the button to monitor the signal through the LINE 1 terminal.
When the button is pressed, the LINE 1 button lamp will
light.
F
（
6
）
LINE 2 Button/Lamp
Press the button to monitor the input signal among VIDEO, Y/C, YPbPr. On the first page of
USER CONFIG menu, from “LINE 2 Input” item, you can set the input signal format which
should be monitored.
When the button is pressed, the LINE 2 button lamp will
light.
F
（ 7 ） DVI-I Button/Lamp
Press the button to monitor the input signal among VGA, DVI-D, and HDMI. On the first page
of USER CONFIG menu, from “DVI-I Input” item, you can set the input signal format which
should be monitored.
When the button is pressed, the DVI-I button lamp will
light.