OSEE LM-150 SERIES, User Manual, Page: 13 / 20

LM-150 SERIES LCD MONITOR Operating Manual
—
9
—
4.4 Front Panel Control Buttons And Functions
4.4.1 Power Standby/ON
 （
1
）
POWER : Power Standby / ON Switch
Press this switch to turn on the power of this unit or to set this unit in the standby mode.
Last settings recall with power.
Unlit : The monitor is completely off (mains switch is off).
Lights in Green : The monitor is on.
Lights in Red : The monitor is off ( standby ).
4.4.2 Input Terminal Select Area
 （
2
）
SDI 1 : SDI1 Input Terminal Select Button/Lamp
Press this button, the SDI1 button lamp lights. The signal of input terminal SDI 1 displays
on the screen.
Note ：
Only LM-150S-Z and LM-150S-D are available for this button.
 （
3
）
SDI 2 : SDI2 Input Terminal Select Button/Lamp
Press this button, the SDI2 button lamp lights. The signal of input terminal SDI 2 displays
on the screen.
Note ：
Only LM-150S-Z and LM-150S-D are available for this button.

（
4
）
LINE 1 : VIDEO Input Terminal Select Button/Lamp
Press this button, the LINE 1 button lamp lights. The signal of input terminal LINE1
displays on the screen.

（
5
）
LINE 2 : LINE 2 Input Terminal Select Button/Lamp
From this button, three types of input terminal signal can be selected, which are
VIDEO,Y/C,YPBPR in turn. When you press the button , the LINE 2 button lamp lights.
Repeatedly press the button, you can select the signal mentioned above in turn. The
selected signal can be saved, when you return to it next time, it will be the channel you
selected last time.