OSEE LM-150 SERIES, User Manual, Page: 12 / 20

LM-150 SERIES LCD MONITOR Operating Manual
—
8
—
The specifications of terminals are as follows
：
1 GPI
：
GPI Terminal
Female RJ-45 Receptacle
TALLY Lamp Status GPI 1 Pin GPI 2 Pin
Green GND Open
Red Open GND
Orange GND GND
2 CONFIG
：
Configuration Terminal
It is used to update the program only.
3 RS485 IN : RS485 IN Terminal
；
4 RS485 OUT : RS485 OUT Terminal
；
Female RJ-45 Receptacles
Pin No. RS485 IN terminal signal RS485 OUT terminal signal
1
、
2 GND GND
3 Tx- Tx-
4 Rx+ Rx+
5 Rx- Rx-
6 Tx+ Tx+
7
、
8 NC NC
5
O
/– (
Power) Switch
The power is turned on or off.
The monitor is turned on by pressing side
–.
6 Power Input Connector
Total power consumption: 100-240V AC, 50-60Hz;
Equipment power consumption: 30W;
A power source with the capacity of more than 45W is recommended.