OSEE LCM170-A, User Manual

Page: 23 / 69

Locations and Function of Parts and Control
17
User Preset.

If the value related to the function button can
’t be modified, the value
shows in gray.

For F2/U2~F4/U4 function buttons, the operations are as the same as
F1/U1's.

Use FUNCTION KEY menu to assign F1~F4. You can assign the function
from among: Camera LUT, Undef, Blue Only, Mono, Marker, Audio Meter,
Time Code, Waveform Type, Vectorscope, Histogram, Scan, Aspect,
Native, Mute, IMD Display, False Color, Focus Assist, Peak, Zebra. Refer
to "5.1.4 USER CONFIG Menu" for the details.
8.
Power
Used to power on or standby, and the light in the button will indicate the
status of the power. When the monitor is powered on, the light is green,
press the power button and hold 2 seconds, it will enter into standby
mode, the light is red.
4.2
Rear Panel
It will introduce the arrangement and the operations of the interfaces in rear
of the panel in the following.
4.2.1
Arrangement of Rear Panel
For the arrangement of the rear panel of LCM170-A is shown in Figure
4.2-1, there are various input and output interfaces at the rear panel, and
build-in speakers in the top.